Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Tamarac
Furnace repair in Tamarac typically costs $150 – $700, and most calls are handled same day or next morning. When a furnace quits during one of South Florida’s damp January cold snaps, a house gets uncomfortable fast, especially for residents who are home all day in communities like Kings Point. Our techs know the homes here, the aging systems, and the attic ductwork that causes so many Tamarac failures. Call us at (754) 354-7289 and a live person answers, day or night, ready to schedule a repair with a written price before any work begins.
Key Takeaways:
- Furnace repair in Tamarac runs $150 – $700 for most jobs, parts and labor included.
- Every repair carries the 365-Day Done Right Promise, written down before our tech leaves.
- We answer the phone 24/7 with a live person, not a voicemail tree.
- Our techs are trained on Carrier, Trane, Lennox, and American Standard, among others.
Why Cold Harbour Heating and Air Fort Lauderdale Is Tamarac’s Preferred Furnace Repair Company
Tamarac homeowners call us because we do what we say we’ll do, in writing. The Kingswell Way governs every visit: say the price before the work, show up in the window given, leave the place cleaner than we found it, put the guarantee on paper, and come back if the repair fails. That last part isn’t a sales line. It’s the 365-Day Done Right Promise, and it means if a furnace repair we make doesn’t hold for a full year, we return and correct it at no charge. No argument, no re-diagnosis fee, nothing but a fixed furnace.
Our crews know Tamarac’s housing stock because we’ve worked on hundreds of these systems. Homes built in the 1970s and 80s, the peak of Tamarac’s development, now have furnaces and air handlers pushing 15 to 30 years old. In active adult communities with strict aesthetic rules, that condenser on the small side yard often hides a failing attic coil. Victor Mancini, who leads Cold Harbour Heating and Air, insists every tech test the full system before quoting a repair, so we’re not guessing at the problem and you’re not paying for a part that won’t fix it.
When we say Furnace Repair is a core trade for us, it’s because we’ve been doing this since 2003. A live person answers our phones around the clock, and our background-checked, uniformed technicians arrive in the window we gave you. For Tamarac specifically, that usually means same-day service for calls before noon in communities like Kings Point, Woodmont, and the neighborhoods off Commercial Boulevard.
Styles & brands we work with
Boiler Repair in Tamarac
Boiler Repair in Tamarac usually means a hydronic heating loop that hasn’t run since last winter and now won’t fire, or a circulator pump that’s seized from sitting idle in a humid garage. Most Tamarac boilers are part of older condominium and single-family systems from the 1980s. A typical boiler repair here runs $150 – $700, depending on whether we’re replacing a thermocouple, a zone valve, or bleeding a waterlogged expansion tank. Before touching anything, we give you a written price. After the repair, the guarantee is on paper too, good for 365 days.
No-heat boiler calls in older condos
We see this a lot around Kings Point and the condo clusters off Pine Island Road. The boiler hasn’t cycled since March, a safety switch or gas valve sticks, and the first cold morning in December turns into a no-heat call. Our techs bring common ignition and control parts on the truck for exactly this scenario, so many Tamarac boiler repairs are one-visit fixes.
Leaking or noisy circulator pumps
After a summer sitting idle in a humid garage or utility closet, a circulator pump can develop a bad seal or seize entirely. The symptom is a banging or gurgling sound at the baseboard, or no hot water reaching the far rooms. Boiler pump repairs generally stay on the lower end of the $150 – $700 range, unless the pump motor itself has burned out and needs full replacement.
Gas Furnace Repair in Tamarac
Gas Furnace Repair in Tamarac often comes down to three things: a dirty or failing ignitor, a faulting gas valve, or a control board that doesn’t like the humidity in a vented attic. Most gas furnaces here are paired with air handlers tucked into hot, humid attic spaces, which accelerates corrosion on electrical connections. A repair that starts with “no heat” can run anywhere from $150 for a flame sensor cleaning to $700 for a new blower motor or gas valve replacement. You get the exact price in writing before we begin, and the job is guaranteed for 365 days after we finish.
Ignitors and gas valves
A hot surface ignitor is a wear part, plain and simple. After a decade of South Florida humidity and heat cycling, it cracks or stops glowing and the furnace won’t light. We replace them the same day in most Tamarac neighborhoods, and we carry gas valves for Carrier, Trane, and Lennox systems on our service trucks to keep the job moving.
Startup failures after the first cold front
When Tamarac gets its first real cold snap in December or January, gas furnaces light for the first time in months. If the system sat unused, spiders, dust, or a corroded pressure switch can trip a safety and shut the system down. Our techs methodically test the sequence: thermostat call, inducer motor, pressure switch, ignitor, gas valve, flame sensor. This is not a job for a homeowner to guess through. A gas furnace has an open flame and a gas line, and a wrong step is genuinely dangerous. Let a trained professional handle it.
Trusted Brands We Service in Tamarac
Our technicians are trained to service nine major residential HVAC brands, including Carrier, Trane, and Lennox, and we stock common replacement parts locally so Tamarac customers aren’t waiting days on a part. If your system is an American Standard from the 1990s or a newer Carrier and the ignitor fails, we likely have the part on the truck when we arrive. That’s the difference between one visit and two, and it matters when the house is cold. We don’t pressure you to replace a furnace because it’s an unfamiliar brand. We fix what’s in front of us.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Tamarac Homes
- Condensate drain lines clogging with mold: Tamarac’s humidity is relentless, especially in vented attics where air handlers sit. A clogged drain trips the float switch, and the furnace simply won’t fire on the first cold snap. We clear the line, treat the pan, and often recommend an inexpensive drain pan tablet to slow regrowth.
- Weak blower motor capacitors: The capacitor gives the blower motor its starting jolt. In Tamarac’s heat, capacitors degrade faster than in cooler climates. Our techs recently repaired a Carrier gas furnace in Kings Point where a weakened capacitor was caught with a five-minute test before it took out the compressor. The homeowner had been away for the summer and came home to a cold house; we replaced the capacitor, recalibrated the thermostat, and verified the refrigerant charge. The 2.5-ton split system ran quietly after that.
- Oversized systems that short-cycle: Many Tamarac condos in 55+ communities have furnaces and AC units larger than the space needs. Short-cycling leaves humidity high and stresses the heat exchanger with constant on/off cycles. When a furnace short-cycles, the heat exchanger cracks sooner, and replacing one is a major repair. We check for this when diagnosing any no-heat call.
- Seasonal residents returning to dead systems: If you leave a Tamarac home empty from May to October, the furnace sits in a humid attic for six months. Blower motors can seize, thermostats can drift out of calibration, and capacitors can fail while you’re gone. We recommend a simple set of checks before you leave, or at minimum, a tune-up when you return. A $80 – $200 tune-up beats a $700 emergency repair.
Pricing for Furnace Repair in Tamarac, FL
Furnace repair in Tamarac costs $150 – $700 for most residential jobs, and the range covers the full spread of what we typically see. Here’s how that breaks down:
| Repair Type | Typical Cost in Tamarac |
|---|---|
| Gas Furnace Repair | $150 – $700 |
| Boiler Repair | $150 – $700 |
What moves a job from the bottom of that range to the top is the part that’s failed. A flame sensor cleaning is fast and inexpensive. A blower motor or gas valve replacement is more involved and costs more. You will always know the price before we start, in writing. That’s not a courtesy; it’s the Kingswell Way. Estimates are free, and you can call (754) 354-7289 for an exact quote on your system. If the repair fails inside 365 days, we come back and fix it at no charge. That’s the guarantee, on paper.
We Also Serve Cities Near Tamarac
Our crews live and work throughout Broward County, so if you’re in Fort Lauderdale, Hollywood, Davie, or Sunrise and need Furnace Repair in Tamarac caliber service, we cover you too. Dispatch and scheduling are coordinated from our South Florida office in Miami, but the techs who knock on your door are local to this area. Same written pricing, same 365-Day Done Right Promise, same live person on the phone. Call (754) 354-7289 from any of these cities and you’ll reach us directly.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Tamarac
The most common reason a furnace runs but doesn’t heat enough in Tamarac is a clogged air filter or a blower wheel covered in grime, which means the furnace can’t move enough air across the heat exchanger to actually warm the house. In attics, a second culprit is a partially collapsed duct or a disconnected duct from years of humidity and heat. Call (754) 354-7289 and we’ll diagnose it, with the repair price in writing before any work begins.
The best prevention for mold in your furnace’s condensate line is to have the line flushed and treated every six months, which our $80 – $200 tune-up includes. In Tamarac’s humid attics, mold grows faster than almost anywhere else in the country, and when the line clogs, the float switch trips and your furnace won’t fire. A half-cup of white vinegar poured into the drain line every month helps, but a proper flush and pan treatment from a technician is the real fix.
Yes, you can leave a Tamarac home empty for the summer without furnace issues, but only if the system is prepared. The biggest risk is the blower motor seizing from months of disuse in a hot, humid attic, or a capacitor failing while you’re gone. We recommend a tune-up before you leave, and when you return, check the thermostat and run the heat for ten minutes before the first real cold snap hits. If it won’t start, call us and we’ll be out the same day in most Tamarac neighborhoods.
A blower motor that’s noisy only at startup usually has a failing capacitor or dry bearings, and in Tamarac’s humid attics, that’s a common failure pattern. The motor struggles to spin up, makes a groaning or rattling sound, then smooths out once it’s running. It’s a warning sign, not a quirk. If the capacitor fails completely, the motor won’t start at all, and you’re looking at a full blower motor replacement on the higher end of the $150 – $700 range. Call us and we’ll catch it early, not after the cold snap.
No, you don’t need a load calculation for a repair. A load calculation, also called a Manual J, is only necessary when you’re sizing a new furnace or AC system for replacement. For a repair, we diagnose the specific failed component and quote the cost to fix it, no load calculation required. If we find that your system is oversized or undersized during the repair, we’ll tell you, but we won’t sell you a calculation you don’t need.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air, serving Tamarac since 2003 as part of the Kingswell network.