Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Sunrise
Furnace repair in Sunrise, FL typically costs between $150 and $700, with most ignitor replacements and gas valve repairs landing in the $150 – $350 range and full heat exchanger work running higher. We get to Sunrise homes fast because our technicians already work these streets every week. If your furnace is blowing cold air, short-cycling, or making a sound you’ve never heard before, call (754) 354-7289 and a live person will answer, day or night. We give you a written price before any tool comes out.
Why Cold Harbour Heating and Air Fort Lauderdale Is Sunrise’s Preferred Furnace Repair Company
We’ve been inside enough Sunrise furnace closets and rooftop units to know exactly what homeowners here deal with. East Sunrise homes off Sunset Strip and University Drive have concrete-block construction that traps heat in rooftop closets. West Sunrise two-stories have long duct runs that punish an undersized blower. Neither surprises our techs anymore.
Victor Mancini founded this company in 2003 on a simple idea: put the price and the guarantee in writing before the work starts. That’s the Kingswell Way, and it’s how every independently owned Kingswell shop operates. Sunrise customers get a written 365-Day Done Right Promise on every repair. If the fix fails inside a year, we come back and correct it at no charge.
Every technician who walks through your door is background-checked, uniformed, and trained on nine major residential brands including Carrier, Trane, Lennox, and American Standard. You’ll know who’s coming. You’ll know what it costs. You’ll know what’s covered. That’s the whole point.
Styles & brands we work with
Emergency Furnace Repair in Sunrise
Emergency Furnace Repair in Sunrise usually means a furnace that quit on the coldest night of the year, a burning smell, or a carbon monoxide alarm that won’t stop. In east Sunrise’s 1970s and 80s tract homes, we often find limit switches tripping from collapsed flex duct, not a failed furnace at all. In west Sunrise’s newer two-stories, we see control boards fried by afternoon lightning storms near the Sawgrass Expressway.
Figure $150 – $350 for most emergency ignitor, flame sensor, capacitor, or gas valve calls. Heat exchanger failures push toward $500 – $700, parts and labor included. A live person answers the phone 24 hours a day, 7 days a week at (754) 354-7289. No voicemail trees. No waiting until morning.
Rooftop Furnace Access
Many east Sunrise homes have furnaces in rooftop closets with narrow parapet clearances. Replacing a blower motor or heat exchanger there takes patience and the right lifting gear. We send techs who have done this exact job in Sunrise dozens of times.
Surge Damage From Storms
Sunrise’s afternoon thunderstorms hammer the area around the Sawgrass Expressway with lightning. Without surge protection, a furnace control board can fry in a second. We check for surge damage first on any furnace that died during a storm, then quote the board replacement before touching anything.
Furnace Maintenance in Sunrise
Furnace Maintenance in Sunrise should happen once a year, ideally before December when the first real cold snap hits. A tune-up runs $80 – $200 and includes cleaning the flame sensor, checking the heat exchanger for cracks, testing gas pressure, inspecting the blower motor amp draw, and measuring static pressure across your ductwork. In Sunrise, that static pressure check matters more than most people realize.
Original flex duct in 1970s tract homes collapses under high static pressure. That makes your furnace short-cycle, trip limit switches, and act like it’s dying when it isn’t. We catch that during a maintenance visit and tell you honestly whether you need a repair or a duct correction.
Static Pressure Testing
We measure static pressure on every tune-up in Sunrise. If your ductwork was sized for a 1980s furnace and you’re running a modern high-efficiency unit, the numbers will show it. Fixing static pressure often solves short-cycling without replacing the furnace.
Heat Exchanger Inspection
Rooftop furnace closets in Sunrise concrete-block homes trap humidity. That humidity eats at heat exchangers, causing cracks that can leak carbon monoxide. Every tune-up includes a visual and combustion test of the heat exchanger, and we write down what we found.
Trusted Brands We Service in Sunrise
Our techs work on Carrier, Trane, Lennox, and American Standard furnaces every day in Sunrise. We stock common parts locally so you’re not waiting a week for an ignitor or gas valve. Whether your Trane rooftop unit off Nob Hill Road needs a heat exchanger or your Lennox closet furnace in the older section near Welleby Park needs a blower motor, we show up with the right training and the right parts on the truck.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Sunrise Homes
- Cracked heat exchangers in rooftop closets. East Sunrise’s concrete-block homes hold heat and humidity in rooftop furnace closets, which accelerates metal fatigue. We see cracked heat exchangers in units under 12 years old because of this.
- Collapsed flex duct causing short-cycling. Original ductwork from the 1970s and 80s can’t handle the static pressure of modern furnaces. The furnace trips its limit switch and shuts off, and homeowners think the furnace failed.
- Surge-fried control boards near the Sawgrass Expressway. Lightning storms roll through Sunrise constantly. Homes without surge protection lose control boards and capacitors, and the furnace won’t ignite at all.
- Corroded wiring and connections from salt air. Sunrise sits close enough to the Atlantic that salt air accelerates corrosion on electrical connections inside furnace cabinets. We clean and replace corroded terminals on almost every call in the eastern half of the city.
Pricing for Furnace Repair in Sunrise, FL
A typical furnace repair in Sunrise runs $150 – $700 depending on what’s failed. Ignitors and flame sensors sit at the low end. Gas valve replacements and blower motor work land in the middle. Heat exchanger replacement is the big one. Maintenance tune-ups cost $80 – $200 flat. Here’s the honest breakdown:
| Service | Typical Price in Sunrise |
|---|---|
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
You get a written price before any work begins. Not an estimate, not a range. A written number. If the job changes once we’re inside, you approve the new number before we touch anything else. Call (754) 354-7289 for a free estimate.
We Also Serve Cities Near Sunrise
Our Furnace Repair team covers Sunrise and the surrounding communities. If you’re in Fort Lauderdale, Hollywood, Davie, or Tamarac, we can usually reach you the same day. For the full picture of what we do across the region, see Furnace Repair in Sunrise. Dispatch is coordinated from our South Florida metro office, and crews serve Sunrise locally every day.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Sunrise
Short-cycling in Sunrise homes is almost always a static pressure problem, not a filter problem. Original flex duct in 1970s and 80s tract homes collapses and restricts airflow, tripping the limit switch and shutting the furnace down early. We measure static pressure to confirm it. Fixing the duct often solves the short-cycling permanently. Call (754) 354-7289 and we’ll diagnose it on the first visit.
Yes, but it depends on access and the unit’s age. We’ve replaced heat exchangers in rooftop closets off Sunset Strip with only 18 inches of parapet clearance. If the unit is too old or the exchanger is under warranty, we’ll tell you straight whether a repair makes sense or a replacement is smarter. Either way, the price is written before we start.
Most component repairs, like ignitors, gas valves, and blower motors, do not require a permit in Sunrise. If we’re doing work that does, like certain gas line or ventilation changes, we handle the permit paperwork for you. We’ll tell you upfront if your job needs one.
Salt air from the Atlantic and high year-round humidity accelerate corrosion on furnace cabinets, burners, and wiring. Sunrise homes east of University Drive get the worst of it. Regular maintenance can slow it down, and we replace corroded components before they fail during a cold snap.
Yes, and it’s often the right call for east Sunrise starter homes where flex duct has collapsed beyond repair. A ductless mini-split heats individual rooms without needing ductwork at all. We’ll walk you through the cost difference honestly and help you decide what makes sense for your home. Call (754) 354-7289 and we’ll give you real numbers.
If your furnace is acting up in Sunrise, call (754) 354-7289. A live person answers. You’ll get a written price and a written 365-day guarantee. That’s how we’ve done it since 2003.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Fort Lauderdale.