A Coldharbour company - serving Fort Lauderdale, FL

Lennox AC Repair Nationwide

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

Your new heating and cooling system for as low as$119/month*On approved credit; ask for current terms

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Lennox AC Repair in Fort Lauderdale: What to Know First

Lennox AC repair in Fort Lauderdale typically runs between $150 and $650 for most common failures, and we complete the majority of Lennox jobs within 24 to 48 hours of your call. We’re an independent Lennox service provider – which means we repair every Lennox line, from the entry-level Merit series to the premium Signature collection, without being tied to manufacturer pricing or parts delays. Cold Harbour Heating and Air Fort Lauderdale has been fixing South Florida Lennox systems since 2003, and every repair leaves with a written 365-day guarantee.

Call (754) 354-7289

If you own a Lennox and your AC is blowing warm, short-cycling, or making a sound you’ve never heard before, this page covers what’s actually going on, what it costs, how we fix it, and how quickly we can get to you. Call (754) 354-7289 and a live person answers – no voicemail tree, no waiting until morning.

Key Takeaways

  • Independent Lennox repair from a brand-agnostic team trained on nine residential lines – Lennox included
  • Written price before any tool comes out, written 365-day guarantee on every repair
  • Same-day and emergency response available across Fort Lauderdale – a live person answers 24/7
  • Most Lennox AC repairs run $150 – $650, parts and labor included

How Lennox Products Fail – and How We Fix Them

Lennox builds efficient, well-engineered equipment. But Fort Lauderdale humidity, salt air, and ten-month cooling seasons push every system harder than most manufacturers intended. Here are the Lennox-specific failure patterns we see most often, matched to the model lines they show up in and what we do to correct them.

  • XC/XP series compressor contactor failures. The Lennox XC and XP lines run high-efficiency compressors, and the contactor – the electrical switch that tells the compressor to start – takes a beating in South Florida’s constant cycling. When it pits or welds, you get a unit that hums but won’t start, or one that runs nonstop and never cools. We replace the contactor with a heavy-duty spec part, check amp draw on the compressor, and confirm the run to full cooling before we leave.
  • Merit series (ML14, ML17) capacitor degradation. Lennox Merit units are common in Fort Lauderdale condos and modest single-family homes. The dual-run capacitor that starts the fan motor and compressor is a consumable part, and coastal heat kills them a year or two early. Symptoms: the outside unit clicks and shuts off, the fan spins slowly, or the compressor won’t kick in. We stock exact-match capacitors for the Merit line and test the replacement under load.
  • Signature series (SL, XC21) inverter board faults after storms. The high-end Signature and XC21 variable-speed Lennox systems use inverter-controlled compressors, and Florida lightning is not kind to the control boards that drive them. A storm takes out the board, and you get error codes, intermittent operation, or complete shutdown. We diagnose the board first, flash the fault codes, and only replace what’s actually failed – not the whole control stack.
  • Elite series evaporator coil leaks. Lennox Elite air handlers are well-insulated and quiet, but the evaporator coil – the part that removes humidity from the air before it reaches your vents – can develop pinhole leaks after years of coastal salt exposure. You’ll notice weak cooling, higher humidity indoors, or an AC that runs constantly without satisfying the thermostat. We pressure-test with nitrogen, locate the leak, and either braze the pinhole or replace the coil with an OEM Lennox part to keep your remaining warranty intact.
  • Condensate drain clogs and overflow shut-offs on all Lennox lines. Fort Lauderdale humidity means every Lennox air handler produces gallons of condensate daily. When the drain line clogs – algae and Florida’s warm, damp air are a perfect match – a float switch shuts the system down. Homeowners often think it’s a compressor failure. It’s usually a clogged line and a five-minute flush. We clean the drain, check the float switch, and get you running for a minimal service call fee.

Victor Mancini puts it plainly: “Tell me what it’s doing, and I’ll tell you what it needs – no guesswork, no runaround.”

Explore

Styles & brands we work with

AC repair
AC repair
Furnace & heating
Furnace & heating
Heat pumps
Heat pumps
Ductless mini splits
Ductless mini splits
Carrier
Carrier
Trane
Trane
Goodman
Goodman

Our Lennox AC Repair Process

  1. 1
    You call, a person answers. No recording, no call center. You describe the symptom, and we schedule a firm arrival window that same day or the next morning. Emergency calls in Fort Lauderdale get routed immediately.
  2. 2
    We show up and diagnose before touching anything. Our technician arrives in uniform, name badge visible, and walks through the system with you. We check thermostat signals, electrical draws, refrigerant pressures (the cooling fluid your Lennox needs to run), airflow, and the specific fault codes if your unit has diagnostics.
  3. 3
    You get a written price before the first tool comes out. We write it down, hand it to you, and the number doesn’t move. If it’s a $40 capacitor, that’s what you pay. If it’s a $525 control board, you’ll know exactly why.
  4. 4
    Parts decision, warranty-safe. If your Lennox is under the manufacturer warranty, we use OEM Lennox replacement parts and handle the paperwork. If it’s out of warranty, we present the OEM option alongside a quality aftermarket alternative and tell you the real trade-off in plain English – often the aftermarket part is functionally identical and less expensive.
  5. 5
    Repair and test. We install, check every connection, and run the system through a full cycle: thermostat call, compressor start, fan spin-up, airflow, temperature drop, condensate drainage. We measure the air coming out of your vents, not just “it feels cool.”
  6. 6
    Cleanup and the written guarantee. We leave the area cleaner than we found it – this is The Kingswell Way, and we’ve never made an exception. Before we leave, you get a written repair report and the 365-Day Done Right Promise on paper. If that repair fails within a year, we return and fix it at no charge. No argument, no fine print.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Lennox AC Repair Costs in Fort Lauderdale

Lennox Repair Scenario Typical Range (Parts + Labor)
Capacitor replacement (Merit, Elite) $150 – $280
Condensate drain flush / float switch reset $150 – $220
Refrigerant recharge (R-410A) $250 – $500 depending on charge level and leak status
Condenser fan motor replacement $350 – $550
Contactor replacement (XC/XP series) $180 – $320
Evaporator coil leak repair or replacement $450 – $650 for targeted repair; full coil replacement can run higher
Control board replacement (Signature / XC21) $400 – $650 depending on board type

What moves the price? The series of Lennox you own (Significance and XC21 parts are pricier than Merit), whether the system is under manufacturer warranty, the accessibility of the unit, and whether a refrigerant recharge is needed. We don’t charge overtime for evenings, weekends, or August heat waves. The written estimate is free, and you approve the number before we pick up a tool. Call (754) 354-7289 and we’ll give you an exact figure for your specific Lennox unit.

Why Fort Lauderdale Homeowners Call Cold Harbour Heating and Air Fort Lauderdale for Lennox Work

We’re independently owned and operated, part of the Kingswell network since 2003, which means we answer to four written promises – not a district manager in another state. Every Lennox repair gets a price before the work starts, a firm arrival window, a clean job site, and the 365-Day Done Right Promise on paper. If the fix fails inside a year, we come back free. No conditions, no questions.

Our technicians are background-checked, uniformed, and trained on nine major residential HVAC brands. You have a Lennox, but your neighbor has a Carrier and your sister runs a Trane – we’re the team who can look at any of them and tell you the truth. For Lennox specifically, that means we know which parts fail, which parts are worth replacing, and when a repair genuinely isn’t worth doing.

Fort Lauderdale homeowners call us because we pick up the phone. Every time. Twenty-four hours a day, seven days a week, a live human being answers. No after-hours runaround, no “leave a message and we’ll call you Monday.”

FAQs

Need HVAC help in Fort Lauderdale? Licensed & insured · same-day response · free estimates
Call (754) 354-7289
Local Service Coverage

Request a Free Estimate in Fort Lauderdale

Tell us what you need - Cold Harbour Heating and Air Fort Lauderdale responds fast. No obligation.

By clicking submit, you accept our Privacy Policy and consent to receive communications by call, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Us
Call Now - 24/7 Dispatch